CareSens N Test Strips are for use with the CareSens N glucose meter to quantitatively measure the glucose levels in fresh capillary whole blood samples.
Manufactured by i-Sense, CareSens N glucose test strips are used for the accurate monitoring of blood glucose levels. CareSens N requires no coding, which means one less step in testing and eliminates errors due to a user miscoding.
 
CareSens N strips require a tiny blood sample, only 0.5 uL, and  deliver accurate results in as fast as 5 seconds. They are designed for easy handling. Blood sample is automatically drawn into the test strip. CareSens N test strips are approved for alternate-site testing for maximum convenience. Alternate site testing can be used to reduce the pain associated with repetitive lancing of the same area.
 
Features:
Exclusively for use with CareSens N glucose meter
Sample Size Needed – 0.5 uL Sample
Rapid Test Time: Only 5 Second
Easy to Handle
No Coding Required
Accurate Results
Alternate Site Testing Approved
 
How To Use:
CareSens N test strips don’t need manual coding and are designed to work with the CareSens N and the CareSens N POP meters.
 
A. PREPARING THE LANCING DEVICE
Unscrew and remove the adjustable tip.
Insert a new disposable lancet firmly into the carrier.
Twist off and set aside the protective cover of the disposable lancet and replace the adjustable tip.
Set the depth of penetration that you want to use; in thicker skin areas use a higher number; in thin sensitive skin areas use a lower number.
Rotate the top portion of the adjustable tip until the setting number matches the arrow.
Cock the lancing device by pulling on the sleeve until the device clicks.
 
B. PREPARING THE METER AND TEST STRIP
Wash your hands and the site from which the blood will be drawn.
Gently insert the square end of the test strip into the meter port with its contact bars facing upwards. The (strip with blood drop) symbol should appear on the screen.
Get a blood sample using your lancing device (see instructions above).
Touch the pointed tip of the strip into the blood droplet on your finger, keeping the test strip verticle to the blood broplet, making sure the blood fills up the small window on the black side of the strip.
Note: You only need about 0.5μl of blood (about the size of a pinhead).
Once the blood sample has filled the confirmation window, the meter will beep. If the window hasn’t filled, an Er4 message will appear.
The test result will appear after the meter counts down from 5 to 1. The result will automatically be stored in the meter’s memory.
Note: the test strip must be inserted into your meter before applying blood to the pointed end.
The meter does not require any manual coding. CareSens N blood glucose test strips are for use only in CareSens N and CareSens N POP meters.
You have about 2 minutes to complete the test.
 
Warnings & Cautions:
Keep out of reach of children.
Store between 1-30°C.
Do not freeze.
Tightly recap test strip vial immediately after use.
Dispose of test strips if past expiration date.
Read & follow enclosed instructions.
Discard used test strips safely in disposable containers
Use only with CareSens N brand of blood glucose meters.